🌐 Español

Fall Protection Toolbox Talk

Short Web-Based Training | OSHA-Based Essentials

Why This Matters

Falls are the leading cause of death in construction, responsible for over 300 deaths annually.

When Protection is Required

OSHA requires fall protection at heights of 6 ft in construction, 4 ft in general industry, and around unprotected edges and holes.

Main Hazards on Jobsites

  • Roofs
  • Leading edges
  • Floor openings
  • Ladders & access transitions
  • Formwork
  • Mezzanines & platforms

Your Protection Options

  • Guardrails
  • Covers
  • Personal Fall Arrest Systems (PFAS)
  • Safety nets
  • Warning lines

PFAS Essentials

  • Only a full-body harness is acceptable
  • Anchor points must support 5,000 lbs minimum
  • Free fall limited to 6 ft max
  • Inspect equipment before each use
  • Don’t tie off low where you could hit a lower level

Inspect It / Remove It

  • Do a pre-use checklist every shift
  • Remove equipment after a fall arrest or visible damage

Rescue Matters

Plan for quick rescue after a fall. Suspension trauma is dangerous; fast rescue saves lives.

Key Takeaways

  • Construction: fall protection required at 6 ft
  • PFAS anchor must hold 5,000 lbs
  • Inspect equipment before use
  • Plan rescue immediately
📖 Fall Prevention Guide — Learn More

Quiz Time

Test your knowledge with these 5 questions. You must score 70% to pass.

Quiz

1. In construction, fall protection is generally required at:

2. For fall arrest, the acceptable body support is:

3. A typical anchor point for PFAS must support at least:

4. Equipment that has arrested a fall should be:

5. After a worker is left hanging in a harness, the right next step is:

📖 Fall Prevention Guide — Learn More